Please use this identifier to cite or link to this item: https://cris.library.msu.ac.zw//handle/11408/4787
Title: Synthesis and characterisation of activated carbon obtained from marula (Sclerocarya birrea) nutshell
Authors: Mkungunugwa, Tafadzwa
Manhokwe, Shepherd
Chawafambira, Armistice
Shumba, Munyaradzi
Keywords: Polluted water sources
Issue Date: 2021
Publisher: Hindawi
Series/Report no.: Journal of Chemistry;
Abstract: Globally, a ninth of people use polluted water sources because an estimated 300–400 Mt of waste and 90% of sewage are discharged into water bodies from industries and developing countries, respectively. The utilisation of indigenous fruit pits in producing novel adsorbents will greatly benefit in wastewater treatment. In most underdeveloped countries, activated carbon (AC) is imported at a high cost. The study was aimed at synthesising and characterisation of AC obtained from Marula nutshell. Carbonization of organic matter from Marula nutshell was carried out at 200°C, 400°C, 500°C, and 600°C. Sulphuric (H2SO4) and phosphoric (H3PO4) acids were used as activating agents at concentrations of 20–60% (v/v). Physicochemical characteristics of the AC, such as bulk density, moisture, ash, pH, and iodine number, were analyzed using standard methods. Functional groups and total carbon content were determined using the FTIR spectroscopy and Nitrogen Carbon Sulphur (NCS) analyzer, respectively. The values of carbon yield and total carbon in activated samples with H2SO4 and H3PO4 were 32.2–93.2%, 26.9–95.8%, and 46–79%, 20.8–69.8%, respectively. The pH, ash, moisture, and bulk density of activated high carbon samples with H2SO4 ranged from 2.4–6.1, 0.65–3.49%, 1.3–8.4%, and 0.42–0.62 gcm−3, respectively. Activated high carbon samples with H3PO4 had 2.7–3.2, 11.3–29.8%, 4.7–14.6%, and 0.39–0.54 gcm−3 pH, ash, moisture, and bulk density, respectively. The synthesised AC samples with 40% H3PO4 at 500°C had the highest iodine value of 1075.7 mg/g. FTIR results showed the presence of aliphatic carboxylic acid salt, inorganic nitrate (NO3−), and phosphate groups in the synthesised AC and were not significantly different (p<0.05) from commercial AC. The untreated Marula nutshell had some aliphatic hydrocarbon (alkanes), inorganic phosphate (PO3-4), aliphatic ester (–COO), and aliphatic carboxylic acid salt (–C(=O)O–) groups. A novel adsorbent, AC was produced from Marula nutshell with the potential to be used in water treatment.
URI: https://doi.org/10.1155/2021/5552224
http://hdl.handle.net/11408/4787
ISSN: 2090-9063
2090-9071
Appears in Collections:Research Papers

Files in This Item:
File Description SizeFormat 
5552224.pdfFull Text1.37 MBAdobe PDFView/Open
Show full item record

Page view(s)

92
checked on Nov 28, 2024

Download(s)

30
checked on Nov 28, 2024

Google ScholarTM

Check


Items in MSUIR are protected by copyright, with all rights reserved, unless otherwise indicated.